The power supply adopts DSP + FPGA digital control technology, which can query the working state of the power supply and cathode at any time and track it dynamically in real time;
The output precision is high, the process repeatability is good, and the film layer consistency is good;
The intelligent arc management system improves the speed of arcing suppression and restart;
Constant current/constant power mode switching, constant power mode can ensure the repeatability of coating process.

Power supply power W	500+500W	1000+1000W
Specification Model	ZY/DCB1F-
	005K01×2	01K02×2
Input Parameters
Input voltage & Frequency	220Vac±10%+PE&50-60HZ
Output Parameters
Working mode	Constant current and constant power (factory default constant power)
Output current max	1000mA×2	2000mA×2
Power matching voltage	500V
Ignition voltage max	≥1000V
Arc detection time	<0.1µs
Arc energy	<0.2mJ/kW
Max. arc suppression capacity	20000Arc/s
Panel display	PLC operation/host computer display
Display resolution	(Via host computer) 1V/1mA/1W
Output accuracy	≤1%
Efficiency	> 90%, on the premise of rated output

Power supply power W	500+500W	1000+1000W
Specification Model	ZY/DCB1F-
	005K01×2	01K02×2
Communication Interface
Analog female interface (standard)	DB25 0-10VDC
RS-485 female interface (standard)	Modbus-RTU DB9 Pin1A 2B
DP female interface (optional, reflected by model suffix)	ProfiBus DB9 Pin3A 8B 5GND
Interlock female interface	DB25 (Pin2 Closed with 5)
Other Parameters
Input cable wiring	10A250V national standard three-plug end power cord
2 outputs and cables	UHF female ×2 standard with 5m RG214 cable
Connector at both ends of output cable	UHF Male-7
Grounding-M6 bolt	2.5mm² (green/yellow) configuration RV2-4 terminal
Power supply size (mm)	2U 19”88H×440W×595D
Net weight	Approx. 13kg
Operating temperature	+5℃-45℃