The power supply adopts DSP + FPGA digital control technology, and the TFT touch screen and storage power supply and cathode working state can be queried at any time and dynamically tracked in real time;
The output precision is high, the process repeatability is good, and the film layer consistency is good;
The intelligent arc management system improves the speed of arcing suppression and restart;
Constant current/constant power mode switching, constant power mode can ensure the repeatability of coating process.

Power supply power W	500W	1000W	2000W	3000W
Specification Model	ZY/DCPulseC1F-
	005K01	01K02	02K04	03K05
Input Parameters
Input voltage & Frequency	220Vac±10%+PE&50-60HZ
Output Parameters
Working mode	Constant current and constant power (factory default constant power)
Output current max	1000mA	2000mA	4000mA	5000mA
Power matching voltage	500V	500V	500V	600V
Ignition voltage	≥1000V
Output waveform	Square wave
Output frequency	DC & 1-100KHZ (factory default 50)
Step adjustment	Step 1KHZ
Interval time	0-10µs (0 DC mode)
Arc detection time	<0.1µs
Arc energy	<0.2mJ/kW
Max. arc suppression capacity	20000Arc/s
Output mode	DC · Pulse
Panel display	7-inch TFT touch screen
Display resolution	1V/1mA/1W
Output accuracy	≤1%, comparison of set values

Power supply power W	500W	1000W	2000W	3000W
Specification Model	ZY/DCPulseC1F-
	005K01	01K02	02K04	03K05
Output Parameters
Efficiency	> 90%, on the premise of rated output
Communication Interface
Analog female interface (standard)	DB25 0-10VDC
RS-485 Female Interface (standard)	Modbus-RTU DB9 Pin1A 2B
DP female interface (optional, reflected by model suffix)	ProfiBus DB9 Pin3A 8B 5GND
Interlock female interface	DB25 (Pin2 Closed with 5)
Other Parameters
Input cable wiring	10A250V national standard three-plug end power cord
Outputs and cables	UHF female comes standard with 5m RG214 cable
Connector at both ends of output cable	Screwed UHF Male-7
Grounding-M6 Bolt	2.5mm² (green/yellow) configuration RV2-4 terminal
Power supply size (mm)	2U 19 "88H ×440W ×385D
Net weight	Approx. 9kg
Cooling method	Air cooling
Operating altitude	Below altitude 2000m
Operating temperature	+5℃-45℃